帽體 Shell: PB-cLc
規格 Standard: Snell, JIS
尺碼 Size: S - XL

日本製造. Made in Japan


Vector-X是第三款使用新型VAS (可變軸心鏡片系統)技術的Arai頭盔,它在SNELL測試線上能提供更大更平滑的外殼表面,大大提高了重要的頭盔”擦過”性能。 Vector-X使用了源自RX-7X大風頂的全新通風系統,可以由頭盔頂部的大型單進氣識別,下巴通風口也是全新的。Vector-X搭配可更換的EcoPure 抗菌除臭內襯,FCS(面部輪廓系統)面棉和與RX-7X相同的鏡片鎖。 所有Vector-X頭盔都標準配有Max Vision透明鏡片,可以加裝Pinlock防霧片。


Vector-X is the third Arai helmet that makes use of the new VAS (variable Axis System) technology that offers a significant larger and smoother shell area above the SNELL test line greatly improving the important helmet glancing off performance.  The Vector-X makes use of an also completely new ventilation system derived from the RX-7X, instantly recognizable by the large, single intake duct on top of the helmet.  This Top Ventilation System is derived from the RX-7X diffuser system. The replaceable interior is lined with an anti-microbial fabric. The Vector-X features FCS (Facial Contour System) and a fixed, non-retractable mini chin cover. The chin vent is also new, while the Formula One developed visor lock system is the same as used on the RX-7X. All Vector-X helmets come with a standard Max Vision visor.



    The Vector-X interior is made with an odor-reducing and dirt-resisting antimicrobial material, that helps keep ph levels balanced, helping the helmet stay fresher longer inbetween cleanings.



    The FCS cheek pad makes putting on and removing the helmet easier while maintaining comfort around the lower jaw, and have 5mm peel-away layers for custom microfitting.

    The ear pockets have molded recesses for easier intercom speaker installation.



    Featuring the PB-cLc (Peripheral Belt - complex Laminate construction) derived from Arai´s exclusive F-1 helmet technology, made from the layering of various proprietary materials, bonded with specially-developed resins.

    The upper edge of the eye port is reinforced with the Peripheral Belt, woven in house using proprietary Super Fibers, to increase strength and help redirect impact energy laterally.



    The upper front vent is Arai´s newest design, incorporating both an intake and exhaust port, creating a “dual flow” effect and is therefore aptly named the Dual Flow Duct. Air enters the front intake of the duct and draws out hot exhaust air from the rear. Toward the back, the newly styled rear Duct Flow Spoiler also incorporates a dual flow system for great airflow. The center duct hole takes in air and uses the low pressure from the left and right duct slots to draw out hot air. This new ventilation system works well in many riding positions, allowing the front and rear vents to let cool air enter from the front regardless of the rider´s head angle.



    External temple pads are desgined to be removed, if you find just a little too much pressure on your temples. Subtle fine tuning like this can make all the difference in even just a short ride.



    Shield mounting utilizes the Variable Axis System (VAS) pivot mechanism. The VAS pivot cover is smaller and lower than the previous design, yielding an average 24mm more area above the cover. As a result the shell is now smoother in the temple area, increasing the helmet’s ability to glance off objects during an impact.



    In shell creation, resin serves to bind material to material. Arai has long developed exclusive resins to create stronger and lighter shells, and has recently developed a new ‘Z Mixture’ resin. It increases the adhesion ability and strengthens the shell with less resin used, allowing for further weight reduction of the helmet.



    Keeping with the Round & Smooth egg-shaped form, the Hyper Ridge, along the lower edge of the shell increases shell strength & protection around the bottom opening - managing energy migration laterally. And the new side exhaust vents, sculpted into the Hyper Ridge design, result in a more efficient and smoother airflow. The Vector-X utilizes Arai´s proprietary multi-density one-piece EPS liner, specifically tuned to each area of the helmet, to maximize performance. Shell shape & strength, combined with the tuned EPS liner, minimizes helmet size & weight - improving rider comfort.

@ 2019 鴻興機械公司 保留所有權 

Hung Hing Motor and Engineering Works Company. All Rights Reserved